• 尊龙凯时(中国)人生就是搏!

    OA
    中文EN0531-82721303
    PRODUCT CENTER产品中心
    Digital MoldIntelligent Lining BoardCustom MoldRing Mill Liner
    Your Current Position:Home-Product-Digital Mold

    Hmr Nmcadi + 10 Semi Autogenous Grinding Ball

    • 【Product Standard】Φ100-170mm
    • 【Product Density】
    • 【Range Of Application】Grinding ball for SAG mill
    • 【Product Presentation】The results of the combination of nano technology and CADI technology show that the matrix structure is compact and uniform. The perfect combination of surface hardness and toughness after hardening.
    • 【Product Feature】No stress concentration, no breakage, no out of round, no peeling during use Impact hardening, soft inside and hard outside, hardening layer by layer, one hard to the end The specific gravity is reduced by 10%, the mill power is saved by 10%, and the no

    【Chemical Composition】

    4.png5.png

    【Technical Specification】

    6.png

    *The effective height difference of falling ball test is 10m, without breakage and roundness

    7.jpg

    Before falling ball test 

    8.png

    After 40 000 drops


    HMR NMCADI+10Case analysis of grinding ball

     

    There are two series of grinding operations in a copper ore dressing plant in Mongolia, two semi autogenous mills with the same specifications, and the operation conditions are completely the same. Series 1 adopts Φ 125mm nmcadi + 10 grinding balls produced by HMR group, and series 2 adopts Φ 125mm forged grinding balls produced by other manufacturers.

    9.png

    Φ9000mm×3000mmSemi autogenous mill

    10.png


    After 1.6 months of operation, the statistical analysis results of grinding ball use effect are as follows:

    The average ball consumption of HMR nmcadi + 10 grinding ball is 327 g / T, and that of other manufacturers is 786 g / T. the unit ball consumption is reduced by 58.4%.

    HMR nmcadi + 10 grinding ball shows the perfect combination of hardness and toughness, work hardening in the process of use, low wear rate, low crushing rate and no loss of roundness.


    11.png

    HMR Φ125mm NMCADI+10Grinding ball


    No dataReturns listNo data
    友情链接: